Bericht versturen
producten
DETAILS VAN DE PRODUCTEN
Huis > Producten >
Fig. 102 van CEI 60335-2-80 De Speld die van de Plafondventilatortest Slijtage op Bout simuleren

Fig. 102 van CEI 60335-2-80 De Speld die van de Plafondventilatortest Slijtage op Bout simuleren

MOQ: 1
Prijs: Customized
Standaardverpakking: Kartondoos
Leveringstermijn: 5 dagen
Betalingswijze: L/C, T/T, Western Union, MoneyGram
Toeleveringskapaciteit: 100 Reeksen per Maand
Detailinformatie
Plaats van herkomst
CHINA
Merknaam
Sinuo
Certificering
Calibration Certificate (Cost Additional)
Modelnummer
SN2210-52
Toegepaste norm:
CEI 60335-2-80
Toegepaste Clausule:
Clausule 22.102.1
Toegepast Cijfer:
Figuur 102
Het Materiaal van de testspeld:
Roestvrij staal
Volledige Diktesectie met Lengte:
Gelijke minstens aan dat van originele bout
Verminderde Diktesectie met Lengte:
Gelijke minstens aan dat van originele bout
Min. bestelaantal:
1
Prijs:
Customized
Verpakking Details:
Kartondoos
Levertijd:
5 dagen
Betalingscondities:
L/C, T/T, Western Union, MoneyGram
Levering vermogen:
100 Reeksen per Maand
Hoog licht:

De Speld van de de Plafondventilatortest van CEI 60335-2-80

,

Figuur 102 Ventilator het Testen Speld

Productbeschrijving

 

IEC 60335-2-80 Fig. 102 Ceiling Fan Test Pin Simulating Wear On The Bolt

 

Product overview:

 

This stainless steel test pin meets the requirements of IEC60335 -2- 80 clause 22.102.1, figure 102.

It is simulated wear on the bolt of ceiling fans.

 

Technical Characteristics:

 

Applied Standards & Clauses IEC60335 -2- 80 clause 22.102.1, figure 102
Test Pin Material Stainless steel
Full Thickness Section with Length At least equal to that of original bolt
Reduced Thickness Section with Length At least equal to that of original bolt
Diameter of a Same as the original bolt that connects the down rod to the motor
Diameter of b 50% "a"
 

How to process the test with the test pin? (Extracted from IEC 60335-2-80:2015 clause 22.102.1)

 

The bolt that connects the down rod to the motor is replaced with the specially prepared test pin shown in Figure 102 that simulates wear on the bolt. The pin is fully inserted so that it connects the down rod to the motor.

 

The fan is supplied at rated voltafe and operated at maximum speed. The pin is them partially withdrawn so that the motor is connected to the down rod by that part of the pin having diameter b.

 

The supply to the ceiling fan shall be automatically disconnected and the fan shall not be capable of operation without replacing the worn bolt.

 

Fig. 102 van CEI 60335-2-80 De Speld die van de Plafondventilatortest Slijtage op Bout simuleren 0

 

 

producten
DETAILS VAN DE PRODUCTEN
Fig. 102 van CEI 60335-2-80 De Speld die van de Plafondventilatortest Slijtage op Bout simuleren
MOQ: 1
Prijs: Customized
Standaardverpakking: Kartondoos
Leveringstermijn: 5 dagen
Betalingswijze: L/C, T/T, Western Union, MoneyGram
Toeleveringskapaciteit: 100 Reeksen per Maand
Detailinformatie
Plaats van herkomst
CHINA
Merknaam
Sinuo
Certificering
Calibration Certificate (Cost Additional)
Modelnummer
SN2210-52
Toegepaste norm:
CEI 60335-2-80
Toegepaste Clausule:
Clausule 22.102.1
Toegepast Cijfer:
Figuur 102
Het Materiaal van de testspeld:
Roestvrij staal
Volledige Diktesectie met Lengte:
Gelijke minstens aan dat van originele bout
Verminderde Diktesectie met Lengte:
Gelijke minstens aan dat van originele bout
Min. bestelaantal:
1
Prijs:
Customized
Verpakking Details:
Kartondoos
Levertijd:
5 dagen
Betalingscondities:
L/C, T/T, Western Union, MoneyGram
Levering vermogen:
100 Reeksen per Maand
Hoog licht

De Speld van de de Plafondventilatortest van CEI 60335-2-80

,

Figuur 102 Ventilator het Testen Speld

Productbeschrijving

 

IEC 60335-2-80 Fig. 102 Ceiling Fan Test Pin Simulating Wear On The Bolt

 

Product overview:

 

This stainless steel test pin meets the requirements of IEC60335 -2- 80 clause 22.102.1, figure 102.

It is simulated wear on the bolt of ceiling fans.

 

Technical Characteristics:

 

Applied Standards & Clauses IEC60335 -2- 80 clause 22.102.1, figure 102
Test Pin Material Stainless steel
Full Thickness Section with Length At least equal to that of original bolt
Reduced Thickness Section with Length At least equal to that of original bolt
Diameter of a Same as the original bolt that connects the down rod to the motor
Diameter of b 50% "a"
 

How to process the test with the test pin? (Extracted from IEC 60335-2-80:2015 clause 22.102.1)

 

The bolt that connects the down rod to the motor is replaced with the specially prepared test pin shown in Figure 102 that simulates wear on the bolt. The pin is fully inserted so that it connects the down rod to the motor.

 

The fan is supplied at rated voltafe and operated at maximum speed. The pin is them partially withdrawn so that the motor is connected to the down rod by that part of the pin having diameter b.

 

The supply to the ceiling fan shall be automatically disconnected and the fan shall not be capable of operation without replacing the worn bolt.

 

Fig. 102 van CEI 60335-2-80 De Speld die van de Plafondventilatortest Slijtage op Bout simuleren 0

 

 

Sitemap |  Privacybeleid | China Goed Kwaliteit Elektrisch apparaat het Testen Materiaal Auteursrecht © 2019-2024 sinuotek.com . Allen Voorgebe*houde rechten.